ALUMINIUM DURA CLAD: CLADDING SHEETS
Dura-Clad® panel is made from Aluminium Alloy AA3003 H24 temper, which is widely used, in marine and industrial applications. Building materials for exterior and interior use, curtain walling and wall paneling. Its is superior in flatness and non-combustible DIN Standard.
Dura-Clad® is manufactured from state of art coil-coating system using PVF2/PVDF (Kynar 500/ Hylar 5000 resin) paint. It comes in 2 coats for solid colour or 3 coats for metallic finish. Dura-Clad® is highly consistent in colour stability , gloss retention, resistance to UV-A, UV-B & UV-C radiation and remains very beautiful for a very long time.
1.850, 2.050, 2.350, 2.550
5.014, 5.555, 6.368, 6.911
Type AA3003 H24
Tensile Strength 140-180 N/mm²
Kynar 500/Hylar 5000 PVDF Coating on front side. Top surface to be protected by Polythene sheets.
Width : 1220mm
Length : Upon Request (Customized Request )
RAL references or made to request
The compositions of Dura-Clad® panels are as below :
SI
0.50
Fe
0.70
Cu
0.10
Mn
0.90 – 1.50
Mg
0.30
Zn
0.20
Ti
0.10
Others
0.15
AI
Remainder
Dura-Clad® with PVF2/PVDF Fluorocarbon coatings have been tested and approved by SIRIM for :-
Certification No: 2001FE0006
Certification No: 2001FE0001
Dura-Clad® Panels COMPLY with the Fire Requirements for Materials specified Under the Malaysia Uniform Building By-Laws (UBBL) 1984.
* Index I indicates fire propagation index is 0.8
* Class One indicates surface of surface spread of Flame.
Coating on a high speed technologically advanced paint-line. Surface pre-treatment by Chromating, cover layers, primer and stoving of paint at temperatures between 249°C to 254°C. Wet film thickness 59-67 microns ensures excellent durability and excellent Surface finishes for exterior applications.
20 / 5 ( 2 coats Top Surface )
ASTMD4145 – 1T
DIN 4102 Part 1 – safe
ECCA-T6 > 6.00mm
>120 in lb
Pass 100 double rubs with MEK
DIN 4102 – A2
ECCA-T4 F-2H
ECCA-T8 – 500 hours
(Corrosion, blisters and loss of adhesion less than 3.00mm from the scribe)
Formulated to contain minimum amount of 70% Polyvinylidene Fluoride polymer which leads to excellent product performance for external application via high speed paint line for colour consistency of Pre-painted coils. Resin system – Fluorocarbon / acrylin Solvent system – Ester / Ketones.